Customer Cases
Customer service cases for elevator parts projects, including control boards, signal boards, door motors, and power boards across Toshiba, Hyundai, Sigma, Mitsubishi, OTIS, and Schindler elevator systems.
39 case studies / Page 2 of 4
Application
OTIS Elevator OTIS
In Mexico and Angola, the XAA177HD1 sensor was aligned for OTIS leveling or photoelectric detection work, with technicians confirming target position, cable condition, and stable controller feedback.
Application
OTIS Elevator OTIS
For OTIS elevators in Colombia and Venezuela, the DAA24270M1 eddy-current weighing sensor was installed to recover load feedback after mounting distance, calibration response, and controller interpretation were checked.
Application
OTIS Elevator OTIS
In South Korea and South Africa, the TAB180BJ2 speed-limiter reset action switch was replaced as part of safety-circuit service, with actuation point, reset feedback, and wiring continuity confirmed on site.
Application
OTIS Elevator Tianjin OTIS
For OTIS door systems in Germany and Italy, the HAD-XB-180 encoder was aligned and wired to restore door-position feedback, then checked through door learning and repeated open-close movement.
Application
OTIS Elevator XIZI OTIS
In Singapore and the Philippines, the CLT-05024MB power board was installed to stabilize low-voltage supply inside OTIS control equipment before technicians continued with controller-response checks.
Application
OTIS Elevator GEN2
For OTIS projects in the United Arab Emirates and New Zealand, the GBA26800LC1 control board was selected where access-control links, cabinet communication, and controller response had to be separated and verified.
Application
OTIS Elevator OTIS
In Indonesia and Australia, the KCA26800ABS8 drive board was fitted during OTIS inverter service to recover drive response, with cabinet wiring, signal feedback, and startup behavior checked through controlled test runs.
Application
OTIS Elevator XIZI OTIS
During OTIS brake-control work in Russia and Canada, the DAA610F rectification control board was installed after output voltage, brake command behavior, and repeated stop response were verified together.
Application
OTIS Elevator XIZI OTIS
For OTIS service work in South Africa and Mexico, the DBA26800H2 burning seat supported memory storage-unit handling where stable contact and safe board-programming workflow mattered more than visible elevator changes.
Application
OTIS Elevator XIZI OTIS
In Russia and South Africa, the GHA21270A1 PCB board was used to recover OTIS controller response, with board compatibility, connector condition, and startup behavior checked in the cabinet.
Application
OTIS Elevator XIZI OTIS
On OTIS door-system jobs in Turkey and France, the FAA24350BL2 door motor was installed after mechanical fit, belt alignment, wiring, and repeated open-close cycles were confirmed.
Application
STEP Elevator Control System STEP control system
For STEP elevators in South Korea and Spain, the SM-02-H board was commissioned as a car-side execution board, with technicians testing I/O response from the car top before passenger service resumed.
Need quality elevator spare parts?
Send us your requirements and get a quick quotation from our experienced team.
Direct Email
Send your part number, quantity, or destination country and we will follow up by email.
